Skip to main content

2016 Blog Update

2016 is here already. I bought DeskPM to try and help me get more blog posts up since I really am not a big fan of the blogger interface.

Anyways expect to see some posts on Modular Synths, VJ stuff, and other general tech / hardware / auto things.

Here is a random pic of my Turing Machine pre build to see if DeskPM will work with my blogger acct.

Comments

Popular posts from this blog

Roland Juno-6 Repairs

A while back at Music Go Round I saw something propped up in the corner behind the counter. It was a Roland Juno-6 in what looked to be good shape with just a broken ARP mode select switch and a key with a broken end. They just got it in and didn't want to fix it so they were selling it as it really cheap. Like really really cheap. So I bought it instantly and went home and found a key and switch on ebay for about $10 each. Replacing the key was a fairly simple, but the switch was a little more involved.



Roland Juno-6 key replacement

1. Remove the two upper screws on the left and right side of the wooden side panels.

2. Remove the screws on the bottom of the synth that attach the keys to the frame. There will be two rows of screws aligned with the front and back of the keys.

3. Gently flip up the metal control panel lid.


4. Remove the spring attached to the top rear of the key you want to replace.


5. Lift up the keys gently. I did not remove the cable bundle coming from them. I jus…

JP-8000 Battery Change

The Roland JP-8000 I have come into possession of needed a new battery in it, as it was displaying the "Low Battery" message. So after finding a good video on YouTube on how to change the battery I noticed the pitchbend wheel and the ribbon controller stopped working. I was thinking I broke something until after stumbling around google I found a very helpful post from Andy T over at Roland Clan. After the battery is changed, sometimes you need to re-calibrate the pitch and ribbon controllers.

Resetting the Mod / Pitch Bend Wheel and Ribbon Controller:
Found at: http://forums.rolandclan.com/viewtopic.php?t=27112

After you replace the battery in the JP,you will need to perform the following steps to get the bender & ribbon controller to work.

1. Before turning the JP on, hold down the SYNC, 12db/24dB and TYPE buttons.

2. Keep holding the buttons down and turn on the JP. It will take awhile but eventually the screen will show 1 midi test.

3. Press 3, display will read 3 B…

Destiny Cosplay - The Queens Brother / Uldren Sov / The Crow

For Pax Prime this year my friends and I decided to do a Destiny group cosplay.

Cnidarium will be going as the Queen of the Reef aka Mara Sov, Pippi and IX as Petra Venj & The Speaker, and I will be going as the Queen's brother Uldren Sov aka The Crow.

Now even though the Queens brother is fully rendered and has some screen time in the cutscene when you goto the reef, there is hardly any concept art or official images of him online. Bungie released some character turnarounds for the queen and such but none for his brother. However, after scouring the internet, I found the original concept artists page on Artstation with some prototype renders for the Crow! Not exactly what I need, but its better than nothing.

It appears that the initial designer for the crow is Zeke Garcia and he has some renders up which i have not seen on any of the other Destiny sites. Also if you look at the bungie employees on Artstation there is alot of concept art which is pretty rad.

I'v started wor…